Posts Tagged ‘Restoration’

Restoring an Original Cast Iron Fireplace

Tuesday, May 19th, 2009

Restoring an original Cast Iron Fireplace is a subject we get asked about a lot due to the fact that we sell Reproduction Victorian Fireplaces. Although we only sell new Gallery Fireplaces we are more than happy to pass on any info and help we can and supply the products you need to restore it with.
Cast Iron Fireplaces are the most likely type of fireplace that need restoring it is easy to restore yourself and if you remove the fireplace so you can work on it a proper height it makes the job far easier. Don’t be tempted to use a blowtorch to remove the paint this can easily crack the cast iron and the fumes are toxic due to old lead in the paint. We suggest using Nitromors paint stripper or any equivalent. Scrape away the dissolving paint using plastic or wooden scraper for the decorative details use a stiff nylon brush don’t be to hasty to remove paint as there will be many layers and it takes time for the paint stripper to work. After all the paint has been removed wipe down with white spirits do not use water or the cast iron will start to rust. A base coat of Heat Temp Paint can then be applied and a top coat if you want the Matt Black finish or if you prefer the more traditional look to the fireplace apply Black Lead Grate polish with a brush leave to dry then buff to the required finish. This fireplace is now complete and will look good for years to come just make sure it’s kept dry and never clean with water to avoid the fireplace going rusty.

 high-temp-paintblack-grate-polish-tube

Tags: , , , , , ,
Posted in Fireplace Care | No Comments »

Restoring a Fireplace To Former Glory

Tuesday, April 28th, 2009

 After using for a while particularly for solid fuel use the fireplace you have will show cosmetic signs of wear and tear this can depend on what type of fuel you have been using whether its coal or wood generally the hotter the burning fuel the more upkeep you will have to make.
Full polished Fireplaces are very simple to maintain we tend to use WD40 for normal monthly cleaning but once every 6 months we tend to use Metal Polish which is applied with a cloth working in small sections in a circular motion its polished into the cast and the excess removed and then buffed with clean cloth to finish to a shiny finish this paste removes all the grime left behind and the Cast iron will sparkle like new it can also be used on brass chrome etc.
For our Black Fireplaces them come from the factory with a tough heat resistant matt black spray applied to the surface this will not normally come off or flake away so it can be dusted with a dry cloth to keep it clean DO NOT use Water on it as this causes rusting. Around the Basket area of the fire this causes white deposits to build up these need to be removed with a brush and then normally sprayed over with Heat Temp Matt Black Paint which will cover all the exiting heat marks be sure to spray evenly over the cast iron back to ensure colour match.
For our Fireplaces that have been Black Leaded we use Black Lead Grate Polish this is a traditional Black lead Graphite finish similar to the Old Zebo product which my granny used to polish her range with. It’s very simple to use and is applied by a cloth or small paint brush cover the area you are going to do wiping excess away at all times leave to dry for half an hour then buff to your desired finish with a clean cloth or with a polishing brush this method is very effective and I think it really makes the features of the fireplace stand out just have a look at the photos below the top one shows before and the bottom one is after black lead has been applied its not bright silver more of a pewter look

 

pembroke-black

Matt Black Pembroke

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pembroke-blk

Black Leaded Pembroke

 

 

Tags: , , , ,
Posted in Fireplace Care | No Comments »