First off before you think about ordering a made to measure granite or tiled hearth have alook through our Hearths Section to make sure we do not have a stock size that is a few cms or inches off the size you require.
Stock size hearths are considerably cheaper than made to measure and for it being a little larger or smaller could save you time and money.
So you have had a look and there is nothing suitabl don’t dispair we can manufacture exactly the right size you need in Granite,Tiled Slate etc.
The main reason for made to measure hearths are either to replace hearth within a room that is carpeted or you have a consructional hearth laid level with your floorboards and standard hearth will not cover it.
Another common reason is a sub hearth for a stove to sit on where there has never been a hearth and it needs to match the front one.
Ok were ready to go then decide on waht size you want your new hearth to be either to cover the hole in your carpet or to extend over the constructional hearth
The Dimensions we require are
A Width
B Depth
C Height
Most hearths are simple three measurements and normally the hearths are made as standard at 50mm in height for normal use there should be no reason to later this
Just bear im mind that granite hearths are boxed and lipped that means the top section overhangs the front and the sides by 10-15mm so if hearth is required to cover cooncrete base take this inot consideration

Alsp if using for solid fuel your granite hearth will be in sections and rejoined so it can expand and contract with the heat from a real fire it has to be done or it will crack if in one solid piece.

If you are in doubt about any made to measure hearth jst ring the office and we can run through it with you.